Xerox 8264E EN Manuale Utente Scaricare il pdf (Pagina 20)

2 Preparing To Print

14 8254E / 8264E Quick Start Guide

6. Eliminate any slack or slant by holding or taping the front edge of the media and rewinding the roll

media a little using the flange on the roll media holder.

• If you don’t hold the front edge of the media while rewinding, it will fall out from

the media feed slot on the rear of the printer.

• Confirm that the right edge of the roll media does not extend outward of the

loading mark on the right side of the media guide at the front of the printer. If it

does, it may negatively affect print quality.

• When setting the roll media, set both sides of the media at least 5mm away from

the edge of the pressurizing roller. If you don’t do this, slippage or creasing may

occur during printing.

No. Name

1 Roll media

2 Media loading mark

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Nessun commento

Xerox 8264E EN Manuale Utente Pagina 20